Three Function Electric Hospital Bed Price in Bangladesh
Families in Dhaka usually start searching for a Three Function Electric Hospital Bed on the day the hospital discharge papers arrive. The doctor says the patient needs to sit up every few hours. The nurse warns about bedsores. Suddenly an ordinary wooden bed becomes the biggest obstacle in the house. This page explains what this bed actually does, what it costs in the current Bangladeshi market, how to judge quality before you pay, and how to keep it running for years.
Medical Product BD supplies, delivers and services patient beds across Dhaka and the rest of the country. Everything below reflects what we see in real homes, clinics and nursing units — not brochure language.
What Is a Three Function Electric Hospital Bed?
A three function electric hospital bed is a motorized patient bed with three separate powered movements. Press a button and the machine does the work that two people used to do by hand.
The Three Powered Movements
- Backrest lift — raises the upper body roughly 0–75°, so the patient can eat, breathe, talk or take a nebulizer sitting up.
- Knee or leg-rest lift — bends the leg section around 0–45°, reducing sliding down the mattress and easing pressure on the hips.
- Full bed height adjustment — the whole platform rises and lowers (commonly in the 45–78 cm range), which is the function caregivers appreciate most.
That third movement is what separates this bed from a two function model. Lowering the bed makes transfers to a wheelchair safer. Raising it saves the caregiver’s spine during diaper changes and dressing.
Electric, Semi-Electric and Manual — The Real Difference
A manual bed uses hand cranks at the foot end. It costs less, never fails during load-shedding, but demands physical effort every single time. A semi-electric bed powers the back and leg sections while the height stays manual. A fully electric three function bed powers all three. For a patient who needs repositioning six or eight times a day, the electric version pays for itself in caregiver fatigue alone.
থ্রি ফাংশন ইলেকট্রিক হসপিটাল বেড হলো এমন একটি রোগীর বেড যেখানে রিমোট চেপে তিনটি কাজ করা যায় — পিঠের অংশ উঁচু-নিচু করা, পায়ের অংশ ভাঁজ করা এবং পুরো বেডের উচ্চতা কম-বেশি করা। হাত দিয়ে ঘুরিয়ে (হ্যান্ডেল/ক্র্যাংক) কষ্ট করতে হয় না। প্যারালাইজড রোগী, স্ট্রোকের রোগী, বয়স্ক মা-বাবা কিংবা অপারেশনের পরের রোগীর জন্য বাসায় এই বেডটি সবচেয়ে আরামদায়ক। ঢাকার ভেতরে হোম ডেলিভারি ও সেটআপ সুবিধা পাওয়া যায়।
Three Function Electric Hospital Bed Price in Bangladesh
Price is the first question, so here it is without the runaround. The Three Function Electric Hospital Bed price in Bangladesh is driven by motor origin, frame steel gauge, rail material and whether a mattress is bundled.
Current Market Price Range
| Bed Type | Typical Market Range (BDT) | Notes |
|---|---|---|
| Two Function Manual Bed | 24,000 – 30,000 | Entry level, hand crank |
| Three Function Manual Bed | 35,000 – 65,000 | Three cranks, no motor |
| Three Function Electric Bed (standard) | 56,000 – 90,000 | Remote controlled, most common home choice |
| Three Function Electric ICU-grade Bed | 90,000 – 1,20,000 | ABS panels, central-lock castors, CPR release |
| Five Function Electric ICU Bed | 1,20,000+ | Adds Trendelenburg and lateral tilt |
| Used / Refurbished Electric Bed | 40–50% below new | Warranty rarely available |
These are market observations collected from Bangladeshi suppliers and marketplaces, updated as of August 2026. Import duty, dollar rate and shipment timing move these numbers, so treat the table as a planning guide rather than a quotation.
What Actually Changes the Price
- Motor system — a branded linear actuator with soft-start costs more than a generic motor, and it is the part that fails first on cheap beds.
- Frame material — ERW rectangular steel tube with electrostatic powder coating outlasts thin painted tube.
- Side rails — collapsible aluminium rails cost more than fixed steel ones but are far easier for daily care.
- Castors — 125 mm individually-locked wheels versus basic wheels.
- Panels — ABS head and foot boards add cost, look better in a bedroom and clean easily.
- Load capacity — beds rated 220–250 kg use heavier steel than 120 kg models.
Should You Buy or Rent?
Rental exists for a reason. If the doctor expects recovery in four to eight weeks — a fracture, a post-operative period, a short palliative stretch — renting a hospital bed is usually the sensible financial choice. If the patient has a long-term condition such as advanced Parkinson’s, spinal injury or dementia, buying wins within a few months. We offer both, so ask before committing.
দাম সম্পর্কে জরুরি কথা
বাংলাদেশে ইলেকট্রিক হসপিটাল বেডের দাম সাধারণত ৫৬,০০০ থেকে ৯০,০০০ টাকার মধ্যে থাকে, তবে মোটরের মান, ফ্রেমের স্টিল এবং ম্যাট্রেস আছে কি না — এসবের উপর দাম কম-বেশি হয়। কেউ যদি অস্বাভাবিক কম দাম বলে, তখন মোটরের ওয়ারেন্টি ও লোড ক্যাপাসিটি জিজ্ঞেস করে নিন। আজকের আপডেট দাম জানতে কল করুন ০১৮১১১২২৬৯৮।
Why Choose This Bed
Compared with a manual patient bed, an electric three function model reduces caregiver dependency dramatically — one person can manage tasks that previously needed two. Compared with a five function ICU bed, it costs considerably less while covering almost everything a home patient realistically needs. It sits at the practical middle of the range, which is exactly why it is the most-ordered patient bed category in Dhaka.
Need help matching a model to your patient’s condition? Our team walks through it with you before you order. Call 01811122698.
Technical Specifications and Package Contents
| Specification | Details |
|---|---|
| Brand | Multiple brands available (China / imported) |
| Model | Three Function Electric Hospital Bed |
| Product Type | Motorized adjustable patient bed |
| Category | Hospital Bed → Electric Bed |
| Functions | Backrest, knee/leg rest, full height (all electric) |
| Backrest Angle | Approximately 0–75° (model dependent) |
| Leg Rest Angle | Approximately 0–45° (model dependent) |
| Height Adjustment | Approximately 45–78 cm (model dependent) |
| Overall Size | Around L 2000–2100 × W 900–960 mm |
| Frame Material | Mild steel ERW tube, electrostatic powder coating |
| Mattress Platform | Four-section perforated or slatted platform |
| Side Rails | Collapsible aluminium or steel rails |
| Castors | 125 mm castors with individual locks |
| Load Capacity | 120–250 kg depending on model |
| Voltage / Power | 220V AC, 50Hz, low-wattage actuator motors |
| Control | Handheld remote with function lock |
| Mattress | Optional — foam or anti-bedsore air mattress |
| Certification | Manufacturer-dependent; confirm before purchase |
| Country of Origin | Model dependent; imported units available |
| Warranty | Brand and model dependent — confirm motor coverage |
Technical note: motor wattage, actuator brand, exact platform size and mattress thickness differ between production batches. Always confirm the current specification sheet for the unit in stock before payment.
Package Includes
- Three function electric bed frame, fully assembled or in flat-pack sections
- Handheld remote controller with cable
- Head board and foot board
- Pair of collapsible side rails
- Set of four castors with brakes
- IV / saline stand
- Power cable and basic tool kit
- Mattress (only when the package specifies it)
- User manual and warranty documentation where provided
Electrical Requirements
The bed runs on standard household 220V power. Use a dedicated wall socket rather than a loaded extension board, and keep the cable routed away from castor paths. Some models offer a battery backup module — a genuinely useful add-on in areas with unstable supply.
Key Features Worth Paying For
- Three independent motorized functions controlled from one handheld remote
- Smooth soft-start motion that avoids jolting a fragile patient
- Full height adjustment for safe wheelchair and commode transfers
- Backrest positioning that supports breathing, feeding and nebulizer use
- Knee break that stops the patient sliding toward the foot end
- Heavy-duty steel frame engineered for continuous long-term use
- Rust-resistant powder coating suited to humid Bangladeshi conditions
- Collapsible side rails that lock securely and fold away for care access
- Four lockable castors for stable positioning and easy room-to-room movement
- Four-section mattress platform that supports proper spinal alignment
- Wipe-clean surfaces that tolerate daily disinfection
- Compatible with anti-bedsore air mattresses, overbed tables and IV poles
- Remote function lock to prevent accidental adjustment by the patient
- Quiet actuator operation that does not disturb night rest
Seven Practical Benefits You Will Notice in the First Week
For the Patient
1. Better breathing. A semi-upright backrest position eases respiratory effort for COPD, asthma and post-COVID patients. 2. Fewer pressure injuries. Easy repositioning means position changes actually happen every two hours instead of being skipped. 3. Restored dignity. Patients can adjust themselves rather than calling for help every time.
For the Caregiver
4. Protected back. Raising the bed to waist height eliminates the stooping that causes caregiver back injury. 5. One-person care. Tasks that needed two people — sitting up, sponge bath, bedpan — become manageable alone. 6. Faster routines. Meals, medication and physiotherapy positioning take minutes instead of a struggle.
For Hospitals and Clinics
7. Better bed turnover and nursing efficiency. Wards using electric beds report faster patient handling and fewer staff injury complaints, which matters when nursing staff are stretched.
How It Compares With Other Patient Beds
Versus a Two Function Manual Bed
The manual bed is cheaper and mechanically simple. But it has no height adjustment, and every position change requires cranking. Best for short-term use with a mobile patient and an able-bodied family.
Versus a Three Function Manual Bed
Same three movements, powered by muscle instead of motors. It saves roughly 20,000–30,000 taka and never depends on electricity. The trade-off is real physical effort several times a day — a poor fit for elderly spouses caring for elderly patients.
Versus a Five Function Electric ICU Bed
The five function bed adds Trendelenburg and reverse Trendelenburg tilt plus lateral positioning, which matter in critical care, not in most homes. Unless a doctor specifically prescribes tilt positioning, the extra 40,000–50,000 taka buys capability that stays unused.
Applications and Who Should Buy It
Where It Is Used
- Hospital general wards and private cabins
- HDU and step-down units
- Private clinics and diagnostic centres
- Nursing homes and old-age care facilities
- Rehabilitation and physiotherapy centres
- Home care for bedridden patients
- Post-operative recovery at home
- Stroke and paralysis long-term care
- Palliative and end-of-life care
- Elderly care with mobility loss
- Dialysis and chemotherapy day-care rooms
- Corporate and factory medical rooms
Ideal Buyers
Families caring for a permanently bedridden relative benefit most. So do clinics upgrading from crank beds, home healthcare agencies renting equipment out, and anyone caring for a patient above 70 kg where manual lifting is unsafe.
When It Is Not the Right Choice
If the patient walks independently and only needs occasional back support, a two function bed is enough. If your building has frequent long power cuts and no IPS, ask about battery backup first or consider a manual model.
Buying Guide: How to Choose Without Overpaying
Buying a patient bed is unlike buying furniture. You are buying a medical device that will carry a vulnerable person for months. Work through these points before you pay.
Start With the Patient, Not the Product
Write down the patient’s weight, mobility level and main medical need. A 95 kg stroke patient needs a 220 kg-rated frame and wide platform. A frail 50 kg elderly patient needs low minimum height for safe transfers. A COPD patient needs a backrest that holds a steep angle without drifting down. The specification follows the person.
Interrogate the Motor
This is where cheap beds fail. Ask three questions: which actuator brand is fitted, how long is the motor warranty, and are replacement motors available locally? A bed with an unrepairable motor becomes a very expensive manual bed after eighteen months. Listen to the motor run through a full cycle — grinding or hesitation at the top of travel is a warning sign.
Inspect the Frame and Welds
Look at the joints, not the paint. Clean welds, uniform coating and no flex when you press the platform corners indicate honest steel. Push the assembled bed at head height — noticeable sway means thin tube. Check that the powder coating covers the underside too, because that is where humidity attacks first.
Rails, Castors and the Platform
Collapsible rails should lock with a firm click and release with one hand. Castors need individual brakes; at least two should lock. A four-section perforated platform ventilates the mattress better than a solid sheet, which reduces heat and moisture under a bedridden patient.
Choose the Mattress Deliberately
Do not treat the mattress as an afterthought. For a patient who will spend more than a few weeks in bed, an anti-decubitus air mattress with an alternating pressure pump is close to essential. A standard four-part foam mattress works for shorter recoveries. Confirm whether the quoted price includes any mattress at all — many low quotations do not.
Budget Realistically
Set your budget around three numbers: the bed, the mattress, and delivery plus installation. A 65,000 taka bed with a 12,000 taka air mattress is a better outcome than an 80,000 taka bed with a foam sheet. Also keep a small reserve for a spare remote or an overbed table.
Common Buying Mistakes
- Buying purely on the lowest quoted price and discovering the mattress, rails or IV stand were excluded
- Ignoring the load capacity and overloading a 120 kg-rated frame
- Skipping room measurement — the bed must clear doorways, lifts and stair turns
- Assuming any electric bed handles ICU needs without checking for CPR release
- Buying a used bed without testing every motor function under load
- Forgetting to confirm who installs it and who services it later
What We Usually Recommend
For most Dhaka homes, a mid-range three function electric bed with aluminium collapsible rails, 220 kg load rating, and a separately-chosen alternating pressure mattress delivers the best balance of durability, comfort and price. Spend on the motor and the mattress; economise on cosmetic extras.
Care, Cleaning and Maintenance
Daily and Weekly Cleaning
Wipe the frame, rails and remote daily with a mild disinfectant on a damp cloth. Never pour water on the bed or spray liquid near the motor housing or control box. Dry the surfaces afterwards — standing moisture around welds starts corrosion.
Storage Between Patients
If the bed will sit unused, lower it to minimum height, unplug it, coil the cable loosely, and cover it with a breathable sheet in a dry room. Running each motor through one full cycle every month keeps actuators from seizing.
Inspection and Part Replacement
Check monthly for loose bolts, worn castor treads, frayed cable insulation and rail play. Replace a damaged remote or cable immediately rather than taping it. Mattresses generally need replacement every two to three years under continuous use.
Maintenance Checklist
- Tighten frame and rail bolts once a month.
- Test all three functions through full travel weekly.
- Keep the power cable clear of castor wheels at all times.
- Clean castor wheels of hair and thread that jam the bearings.
- Never exceed the stated load capacity, including caregiver weight.
- Keep liquids away from the control box and remote port.
- Use a stabilised power source in areas with voltage fluctuation.
- Lubricate moving joints lightly as the manufacturer advises.
- Inspect welds for hairline cracks every few months.
- Verify brakes hold on tile before every transfer.
- Do not use the bed as a step or seat for visitors.
- Keep the manual and warranty card in a fixed place.
- Schedule professional servicing once a year for continuous-use beds.
- Photograph the model and serial plate for faster spare-part support.
- Call a technician for any burning smell, sparking or unusual noise — do not open the control box yourself.
Frequently Asked Questions
Q1. What is the Three Function Electric Hospital Bed price in Bangladesh right now? Most standard electric three function beds fall between 56,000 and 90,000 BDT, with ICU-grade models running higher. Call 01811122698 for today’s exact price.
Q2. Is a mattress included? Sometimes. Some packages include a four-part foam mattress; anti-bedsore air mattresses are almost always priced separately. Ask before ordering.
Q3. Can I rent instead of buying? Yes. Rental suits recoveries expected to last a few weeks. We provide hospital bed rental with home delivery in Dhaka.
Q4. Are used electric hospital beds worth it? They typically cost 40–50% less, but motors are the wear item and warranty is rarely available. Test every function under load before agreeing.
Q5. Do you deliver outside Dhaka? Yes, nationwide delivery is arranged. Charges depend on distance and access.
Q6. How much space does it need? Plan for roughly 2.1 m length and 1 m width, plus clearance on at least one side for caregiver access and rail movement.
Q7. Will it work during load-shedding? The bed holds its current position when power cuts. Choose a model with battery backup, or keep an IPS connection, if outages are frequent.
Q8. How much electricity does it use? Very little — the motors draw power only during the seconds they are actually moving.
Q9. Can it be used with an oxygen concentrator or nebulizer? Yes. Keep oxygen equipment away from the control box and route tubing clear of moving sections.
Q10. Who installs it? Our team handles delivery and setup, and shows the family how to operate every function safely.
প্রশ্ন ১১. থ্রি ফাংশন ইলেকট্রিক হসপিটাল বেডের দাম কত? সাধারণত ৫৬,০০০ থেকে ৯০,০০০ টাকার মধ্যে পাওয়া যায়। মোটর, ফ্রেম ও ম্যাট্রেসের মানভেদে দাম কম-বেশি হয়। আজকের দাম জানতে ০১৮১১১২২৬৯৮ নম্বরে কল করুন।
প্রশ্ন ১২. বাসায় ব্যবহারের জন্য কোন বেড ভালো? প্যারালাইজড, স্ট্রোক বা বয়স্ক রোগীর জন্য থ্রি ফাংশন ইলেকট্রিক বেডই সবচেয়ে সুবিধাজনক, কারণ রিমোট চেপেই উচ্চতা ও পিঠ ঠিক করা যায়।
প্রশ্ন ১৩. বেড ভাড়া নেওয়া যায় কি? হ্যাঁ। অল্প সময়ের জন্য (যেমন অপারেশনের পর ১–২ মাস) হসপিটাল বেড ভাড়া নেওয়াই বেশি লাভজনক।
প্রশ্ন ১৪. ঢাকায় ডেলিভারি ও সেটআপ পাওয়া যাবে? হ্যাঁ, ঢাকার ভেতরে দ্রুত হোম ডেলিভারি ও ফ্রি সেটআপ সুবিধা আছে। ঢাকার বাইরেও কুরিয়ারে পাঠানো হয়।
প্রশ্ন ১৫. বেডসোর ঠেকাতে কী করতে হবে? প্রতি ২ ঘণ্টায় রোগীর পজিশন বদলান এবং সাথে একটি এয়ার ম্যাট্রেস (অ্যান্টি-বেডসোর) ব্যবহার করুন।
Order Your Three Function Electric Hospital Bed Today
A patient who cannot sit up comfortably today should not still be waiting next week. Tell us the patient’s weight, condition and room size, and we will recommend the right configuration, quote the current price, and get the bed installed.
📞 Call now: 01811122698 💬 WhatsApp: 01811122698 📧 Email: [email protected] 📍 Mirpur 2, Block A, Road 5, House 12, Dhaka 1216
Fast delivery across Dhaka · Warranty-backed products · Installation included · Nationwide shipping · Rental available
Reviews
There are no reviews yet.